Precision Machine tool used rotary table bearing ZKLDF260 precision: P4(runout≤3μm); P2(runout≤1.5um)
Precision Machine tool used rotary table bearing ZKLDF260 advantages: High speed, High precision, High rigidity, High load

Precision Machine tool used rotary table bearing ZKLDF260 (HONBbearing05)

Model: ZKLDF260

ID(Inner diameter):260mm

OD(Outer diameter):385mm

Thickness(Height):55mm

Axial dynamic load rating(Ca):155KN

Axial static load rating(Coa):920KN

Limiting speed:1200r/min

Bearing friction torque:7.5Nm

Mass(Weight):22KG

ZKLDF axial angular contact ball bearing series have a unity outer ring, two inner ring, two rows of ball rollers and cage assembly, and contact angle is 60. the outer rings and inner rings have fitting holes and easy to fit by joint bolt. the unit is located by means of retaining screws for the safety of transport and handling.(HONBbearing05)

ZKLDF bearing is a kind of high speed bearing, rolling element is ball.

ZKLDF axial angular Contact ball bearing series have double side sealing covers which can against dirt, impurities and avoid grease leak.

ZKLDF axial angular Contact ball bearing series using complex barium-base grease, you can add the Grease through grease hole. ZKLDF Axial angular contact ball bearing series are designed with 60 contact angle and two Rows of ball rollers, which can support radial load, double axial loads and tilting moments. Due to the special design with copper cages, the bearing have higher strength and lower Friction torque. so this kind of bearings are especially Appliated to the situation with super speed, long time running, high stiffness and High precision.(HONBbearing05)